Send inquiry
| CNC plasma cutting machine | |
| 1.Smart design,stable operation | |
| 2.Electric height adjustment | |
| 3.High precision | |
| 4.Prompt shippment | |
| CNC plasma cutting machine: | |
| This type of cutting machine for high cantilever structure to solve the large-size CNC cut parts; transverse effective cutting width of 2m, the longitudinal section may need to configure the multi-rail. Can be configured according to user requirements flame or plasma cutting mode, and the corresponding increase in system configuration; using linear guide, side drive. | |
| Parameters: | |
| Cross Beam Length | 2700mm |
| Longitudinal Rail Length | 3000mm |
| Effective Cutting Width (X axis) | 2000mm |
| Effective Cutting Length (Y axis) | 2200mm |
| Cutting Mode | Flame only; Plasma only |
| Drive Mode | Single-side |
| Drive Method | Rack and pinion drive for X and Y axes |
| Flame Cutting Thickness | 6-200mm |
| Plasma Cutting Thickness | 1-60mm (according to the specification of plasma power source) |
| Cutting Speed | 0-3500mm per minute |
| Moving Precision | 0.01mm per step |
| Power Source | 220V 50Hz 500-1000W |
| Cutting Gas | Acetylene, Propane |
| Plasma Gas | Pressed air, Oxygen, N2 |
| Torch Height Controller | Electromotion bottom |