The appearance of patent products

     Wisman XFN series of highly stable and precise high voltage power module is X - ray tube for small size low cost power.XFN series module power supply provides a negative high voltage output, provide suspended filament voltage.XFN series module power supply can be internal or external, simulation, digital computer measurement & control, XFN series module power supply overvoltage, overcurrent protection, arc, safety interlock.

XFN applied to a variety of global grounded anode X ray tube, high-voltage output minus 0? 50KV (or minus 0? 65kV), maximum current to the 2mA, emission current is limited to 50, 65 or 75 WATTS, floating AC filament power supply output current of 0.3A to 5A.High stability and low ripple.OEM ideal.

Typical application:

X ray fluorescence spectrometer, X ray, X ray imaging, nondestructive detection,

Measurement of the thickness of plating, measurement, particle size measurement, density measurement, cable testing

Partial, examination, inspection, the diamond crystal mineral analysis, plastic sorting,

X diffraction, PCB detection, multilayer PCB alignment......

Optional function:

5VPM 0-5V given and display

USB USB2.0 computer measurement and control

RS-422 RS-422 computer measurement and control

RS-232 RS-232 computer measurement and control

Specification:

Input: DC24V ± 10% DC, maximum current 5A.

Output: negative 20KV, 30KV, 40KV, 50KV, 65KV, used for the negative high voltage filament suspended ray tube.

Voltage control: internal power supply: power supply with multiturn potentiometer can be output voltage settings in 0V to the highest voltage.

External remote control: external 0 to 10V control signal can be output from 0V to the maximum output voltage.

Emission current control:

AC filament power supply: output current of 0-5A adjustable.A filament preheat function.

Voltage regulation rate:

Relative load: 0.01% (no load to rated load)

Relative to the input: ± 0.01% (a change in input voltage of ± 10%)

Current regulation:

Relative load: 0.01% (no load to rated load)

Relative to the input: ± 0.01% (input voltage variations of ± 10%)

Ripple voltage: rated output voltage ripple voltage condition, the peak is the highest output voltage 0.1%.

Stability: starting up half hours after every 8 hours less than 0.05%.

Temperature coefficient: every degrees C ≤ 25ppm

Operating temperature: 0 ℃ to +50 ℃.

Storage temperature: -40 ℃ to +85 ℃.

Voltage current instruction: 0 to +10V, rated output condition and precision of 1%.

Outline dimensions:

50KV: length 205mm, width 75mm, high 185mm.

50KV (digital): length 205mm, width 75mm, high 204mm.

65KV: length 233.5mm, width 75mm, high 185mm.

65KV (digital): length 233.5mm, width 75mm, high 204mm.

Connector:

High voltage output connector: special high voltage cable, power without a high-voltage cable.

Input output connector: DB15 terminal connector, includes a control and display signals.

The output voltage and current of the remote control:

External potentiometer: using an external 0 to 10V voltage on the output voltage and current for remote control.This 10V reference for DB15-1.

USB and RS232, RS422: standard digital monitoring system with a precision of 2%.Control software based on Windows platform operation, all the control and related data display all through the computer realization and access.

Simulation of remote voltage indicator:

The JP2 contains 0 10V voltage and current indicative signal, can be externally connected with various digital or pointer table.